Table of Contents
Advertisement
Connections
Transmitter Connections
The wall-mountable transmitter is in an enclosure that can be mounted in UL standard
wall boxes with Decora-style face plates. The rack-mountable transmitter is in a quarter
rack width enclosure.
Figure 13 shows the front panel of the HDMI 201 A D Tx.
shows the rear panel of both HDMI 201 Tx models.
2
Figure 13.
a
b
HDMI 201 A D Tx Front Panel
INPUT
HDMI
AUDIO-R
RS-232
PASS THRU
AUDIO-L
Rx
Tx
HDMI 201 Tx Front Panel Connectors
HDMI Input connector — Connect an HDMI cable between this port and
the HDMI output port of the digital video source. See
assignments
for pin assignments.
RS-232 connector — Connect a serial communications port to this 3.5 mm, 3-pole
captive screw connector for bidirectional RS-232 communication. See
connector wiring
to wire the connector.
NOTE: The RS-232 connector can also transmit one-way modulated infrared (IR)
signals. See
Modulated IR Pass Through
Figure
14, on the next page,
1
3
HDMI connector pin
Application.
HDMI 201 • Installation and Operation
RS-232
16
Advertisement
Table of Contents
