Extron electronics UCS FT 901 User Manual

UCS FT 901 and UCS FR 902 • User Guide
The UCS FT 901 and UCS FR 902 extend USB signals from USB 3.2, 2.0, and
1.1 peripheral devices up to 985 ft (300 meters) to a USB 3.2 host computer over
multimode fiber optic cable with super speed data transfer rate of up to 5 Gbps.
The transmitter features a USB Type-C connector. The receiver features a
built-in active two-port hub that supplies up to 5 V, 1.5 A each port, to power
attached devices.
The UCS FT 901 and UCS FR 902 are 1 inch (25 mm) high, 3 inches (76 mm) deep, one-eighth rack (transmitter) and quarter rack
(reciever) wide. They can be mounted to a rack or under furniture, or placed on a tabletop.
NOTE:
•
This product supports USB data ONLY. DisplayPort Alt Mode and Power Delivery are NOT supported.
•
The use of USB 2.0 hub on the UCS FR 902 is not recommended. If a USB hub is needed, Extron recommends using a
USB 3.2 hub. Please contact your Extron AE for more details.
FCC Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the
FCC rules. The Class A limits provide reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause interference. This interference must be corrected at the expense of the user.
NOTE: For more information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related
topics, see the "Extron Safety and Regulatory Compliance
Features
•
Point-to-point transmission — Extends USB peripherals up to 985 ft (300 meters) over fiber optic cable for point-to-point
applications.
•
Supports USB 3.2, 2.0, and 1.1 devices — Supports bulk, control, interrupt, and isochronous transfers as defined by the
USB specification.
•
Provides data transfer rates up to 5 Gbps — Allows for the use of USB 3.2 cameras and other USB conference room
peripherals requiring high bandwidth support.
•
Integrated dual-port devices — The receiver has two integrated USB ports, which provide up to 5 volts,1.5 amps on each
port. Allows simultaneous connection to multiple peripheral devices such as USB cameras, docks, all-in-one conference
systems, interactive displays, annotation devices, mass storage, keyboards, and mice in pro AV environments.
•
Real-time status LED indicators for troubleshooting and monitoring — Front panel LED indicators provide visual
confirmation of active host and link status.
•
Rack and furniture mountable — Low-profile, 1-inch (2.5 cm) high, 3-inch deep (7.6 cm), eighth rack wide (UCS FT 901)
and quarter rack wide (UCS FR 902) metal enclosures enable discreet installation, such as beneath a table or behind a
display. One (1) ZipClip 100 and two (2) ZipClip 200 mounting accessories are included.
•
VBUS powered transmitter — UCS FT 901 can be powered by host PC or included external power supply.
•
External Extron Everlast power supply included — Provides worldwide power compatibility with high-demonstrated
reliability and low power consumption.
•
Extron Everlast Power Supply is covered by a 7-year parts and labor warranty
Specifications
Product specifications are available on the Extron website, www.extron.com.
Guide" on the Extron website.
1