Extron electronics VNR 100 User Manual page 31
Vn-matrix single channel recorder
Hide thumbs
Also See for VNR 100:
- Setup manual (4 pages) ,
- User manual (44 pages) ,
- Setup manual (2 pages)
Table of Contents
Advertisement
Attaching the rack rails to a Telco rack
The Telco rack has one vertical post in the middle of each side.
2
Figure 20.
Attaching Rack Rails to a Telco Rack
1.
Assemble the rack rail as described in the section above.
2.
Secure two rail mounting brackets to each rail assembly.
3.
Align the flanges of the rail mounting brackets with the vertical posts of the Telco rack.
4.
Secure the rail assemblies to the Telco rack with the provided mounting screws.
Outer Rail Assembly
2
Rail Mounting Brackets
Rack Mounting Rail
VNR 100 • Reference Information
25
Advertisement
Table of Contents
