To Install A Retail Version Of Windows 98 Second Edition - HP OMNIBOOK XE3 Evaluator Manual

Using Windows 98
Installing Retail Windows 98 Second Edition
12. From the A: prompt type SYS C:
The system is now ready for copying of the operating system files.
13. Insert the Windows 98 Second Edition retail CD-ROM in the CD drive
14. Copy the Windows 98 Second Edition installation files to your hard drive by typing
the following commands:
C:
MD \WINDOWS
MD \WINDOWS\OPTIONS
MD \WINDOWS\OPTIONS\CABS
COPY X:\WIN98\*.* C:\WINDOWS\OPTIONS\CABS
15. Remove the Windows 98 Second Edition CD-ROM and the support utility disk.

To install a retail version of Windows 98 Second Edition

1. At the C: prompt, type \WINDOWS\OPTIONS\CABS\SETUP /IS
2. Select "I accept the Agreement" and click Next.
3. Enter the Product Key, then click Next.
The Product Key is located on the Certificate of Authenticity that you received with your
retail version of Windows 98 Second Edition.
4. When prompted, select "Other Directory" and click Next.
5. Enter C:\WINDOWS for the path, click Next.
6. Click Yes to continue with the specified directory.
7. Choose "Portable" on the Setup Options screen, then click Next.
8. Enter the appropriate User Information, then click Next.
9. Select "Install The Most Common Components (recommended)", then click Next.
10. Select your country or region and click Next.
11. Click Next on the "Startup Disk" window.
12. When asked to insert a disk, Click cancel to skip creating the startup disk.
13. Click Next to start "Copying Windows 98 Second Edition files to Your Computer".
14. When finished copying Windows 98 Second Edition will automatically reboot.
94 Corporate Evaluator's Guide