Installing Retail Windows 95; To Install A Retail Version Of Windows 95 - HP OmniBook 7100 Reference Manual

Using the Recovery CD

Installing Retail Windows 95

If you install a retail version of Windows 95, you'll also need to manually install
video, audio, touch pad, PC Card, and infrared drivers.
This section describes how to
Install a retail version of Windows 95.
Install video support for retail Windows 95.
Install audio support for retail Windows 95.
Install PC Card support for retail Windows 95.
Install infrared support for retail Windows 95.

To install a retail version of Windows 95

Requirements
Windows 95 CD-ROM.
OmniBook 7100 drivers for Windows 95
Location: OmniBook hard drive and on the Recovery CD in
\Omnibook\Drivers\Win95.
1. Shut down the OmniBook
2. Insert the CD-ROM / floppy disk drive in the module bay.
3. Connect the ac adapter and turn on the OmniBook.
4. When you see the HP logo, press F2 to enter the BIOS Setup utility.
5. Open the Boot menu and select CD-ROM as the first boot device. (You may want
to change the boot order back to Diskette Drive after completing this procedure.)
6. Insert the Recovery CD into the CD-ROM drive.
7. From the Windows 95 Startup menu, select Create Hibernation Partition and
select 'Y' to options.
8. From the A:, type FDISK.
9. Do not enable large disk support. Press Enter to continue.
6-6