To Use A Tv Set As Monitor; To Use The Port Replicator - HP OMNIBOOK XE3 Evaluator Manual

Making Connections
Connecting External Components
You can change the Screen area and Colors settings for the second monitor by selecting
Display #2. These settings can be different from your notebook display settings.

To use a TV set as monitor

You can connect your computer to a television set and then use it as a display. The
computer's LCD display continues to be active when you use a TV set.
To connect a TV set
1. Connect a TV cable from the TV set to the TV out port on the rear of the computer or
the port replicator. (You don't need to turn the computer off.)
2. Connect the TV set to a power source and turn it on.
To activate and adjust TV display
If a TV icon appears in the taskbar, click it and follow onscreen instructions. Check the
application's help for more information.
You can also adjust the TV display by following these steps:
1. Click Start, Settings, Control Panel, Display.
2. Select Settings tab and click Advanced.
3. Select S3DuoVue tab and click TV.
4. To center the display in the TV set or to adjust other settings, click Settings under the
TV graphic.
5. The TV Type for your country is automatically detected. (If it is incorrect, select the
correct type: NTSC is used in North and South America, except for Argentina and
Brazil; NTSC/Japan in Japan, South Korea, and Taiwan; and PAL in most other
countries.)

To use the port replicator

With the optional port replicator, you can connect external components—and then avoid
disconnecting and reconnecting them each time you take the computer on the road. You
can find additional information about the port replicator in the manual that comes with it.
70 Corporate Evaluator's Guide