To Install Video Support For Retail Windows 2000 - HP OMNIBOOK XE3 Evaluator Manual

Using Windows 2000
Installing Retail Windows 2000
The password is used to administer User IDs and Windows NT security. The computer
name is used by other computers on the network to access your computer.
12. Enter the correct Time Zone and Date and Time, then click Next.
13. At the "Completing the Windows 2000 Setup Wizard" window, remove the Windows
2000 CD-ROM and click Finish. The system will reboot.
14. At the "Welcome to the Network Identification Wizard" screen, click Next.
15. Give the appropriate choice on user logon, then click Next.
16. Click Finish to complete the Network Identification Wizard.

To install video support for retail Windows 2000

The driver is located on the Recovery CD-ROM in \HP\DRIVERS\W2K\VIDEO.
1. From the Control Panel, double-click System, choose the Hardware tab, and then click
Device Manager button.
2. Double-click "Video Controller (VGA Compatible)" under "Other Devices".
3. Click on the "Reinstall Driver..." button.
4. Click Next on the "Welcome to the Upgrade Device Driver Wizard".
5. Select "Display a list of the known drivers for this device so that I can choose a
specific driver" and click Next.
6. Double-click Display adapters.
7. Click Have Disk and browse to the driver subdirectory on the Recovery CD-ROM
(\HP\DRIVERS\W2K\VIDEO) and double-click on S3SAVMX.INF.
8. Click OK to accept the driver location.
9. In the "Select a device driver window", click Next. Then click Next again to install the
S3 Inc. Savage/IX Display driver.
10. Click Finish, close the Display Driver Properties dialog box. Click Yes to restart your
computer.
11. From Control Panel, double-click Display select the Settings tab then Click Advanced
button.
12. Select Monitor tab, then click Properties button.
84 Corporate Evaluator's Guide