HP OMNIBOOK XE3 Evaluator Manual page 137

Set User Password
Set Supervisor
Password
Password Required to
Boot
Floppy Boot
Power Menu
Intel SpeedStep
Technology
Auto Turn-On on Dock
Boot Menu
Exit Menu
Saving Changes and
Exit
Discarding Changes
and Exit
Sets, changes, or clears user
password, after supervisor password is
set. Password length can be no longer
than 8 characters, 0-9, A-Z.
Sets, changes, or clears supervisor
password. This password protects
BIOS Setup settings.
Sets whether a user password is
required when the computer boots.
Controls permission to boot system
from floppy disk drive.
Sets CPU high-speed/low-speed mode
for AC and battery operation: boot at
high speed with AC, otherwise low
(Auto); no runtime support, boot at low
speed (Disabled); boot at low speed
(Battery Optimized); boot at high speed
(Max. Performance); or boot at low
speed with AC, otherwise high
(Reverse).
Enables or disables automatic system
turn-on when computer is docked.
Indicates boot order of drives (change
order with F5 and F6 keys).
Saves Setup changes to CMOS, exits,
and reboots.
Discards Setup changes since last
save, exits, and reboots. Does not
affect security, date, or time changes.
Specifications and Regulatory Information
Hardware and Software Specifications
Enabled
Enabled
Default
Auto
Enabled
Default
Floppy Drive
Hard Drive
CD-ROM/DVD Drive
Corporate Evaluator's Guide 137