To Install Infrared Support For Retail Windows 98 Second Edition; To Install Touchpad Support For Retail Windows 98 Second Edition - HP OMNIBOOK XE3 Evaluator Manual

6. Enter the directory of the LAN drivers on the Recovery CD-ROM
(D:\HP\DRIVERS\W98\LAN) under "Specify a location" and click Next.
7. Click Next to accept the Accton EN2242 Series MiniPCI Fast Ethernet adapter.
8. Click Next to accept the driver location.
9. Click Finish, then click Yes to reboot the system.
To install infrared support for retail Windows 98 Second
Edition
Before you use your infrared port to transfer files or to print to an infrared printer, you
must enable the infrared port in the BIOS. Follow these steps to use either the standard
infrared driver or the enhanced driver.
1. Reboot your computer.
2. When you see the HP logo, press F2.
3. Select System Devices.
4. Set IrDA port setting to Enabled.
5. Set Mode to FIR.
6. Press F10 to save the changed values and continue reboot.
7. Windows will detect the IR port and install drivers, click Yes to reboot.
8. Click on the infrared icon on the task bar and select the Options tab.
9. Click "Enable infrared communication", click Apply and then click OK to close
window.
To install touchpad support for retail Windows 98 Second
Edition
If a retail version of Windows 98 Second Edition is installed, the touchpad support must
be added. This driver is located on the Recovery CD in \HP\DRIVERS\W98\TOUCHPAD.
1. Double-click \HP\DRIVERS\W98\TOUCHPAD\SETUP.EXE on the Recovery CD.
2. Click Next at the Welcome screen.
Installing Retail Windows 98 Second Edition
Corporate Evaluator's Guide
Using Windows 98
97