Hardware Specifications - HP OMNIBOOK XE3 Evaluator Manual

Specifications and Regulatory Information
Hardware and Software Specifications
Get Default Values
Load Previous Values
Save Changes

Hardware specifications

Because we are constantly improving our products, the specifications shown below are
subject to change. For the latest specifications, see the HP Notebook Web site
(www.hp.com/notebooks).
Dimensions 13.03"x10.72"x1.59" (331x272.3x40.5mm) for 12.1"–14.1"
13.03"x10.72"x1.65" (331x272.3x42.0mm) for 15"
Weight 6.5lbs (3.0kg) with 12.1" TFT LCD/LiIon battery/FDD/CD-ROM/64MB/HDD
CPU Intel PIII/Celeron uPGA2 with SpeedStep (PIII only)
100MHz FSB
Chip Set Intel 440ZXM-100
Main Memory 100MHz SDRAM (PC100)
Maximum memory upgrade to 256MB by two 128MB SODIMM (144-pin/3.3V)
modules in two 1.25" slots
Hard Disk Drive 9.5mm, 2.5" HDD
PCI Bus Master Enhanced IDE
Supports Ultra DMA/33
Floppy Disk 12.7mm, 1.44MB (3-mode)
Drive
CD-ROM/DVD 12.7mm, 24X CD-ROM or 8X DVD
Display 800x600 SVGA TFT 12.1" LCD
1024x768 XGA TFT 13" LCD
1024x768 XGA TFT 14.1" LCD
1024 x768 XGA TFT 15" LCD
138
Restores default settings, stays in
Setup. Does not affect security, date,
or time changes.
Discards Setup changes since last
save, stays in Setup. Does not affect
security, date, or time changes.
Saves Setup changes to CMOS and
stays in Setup. Security settings are
saved when changed.
Corporate Evaluator's Guide