To Install Retail Windows 98 Second Edition - HP F2974KT - OmniBook 500 - PIII 700 MHz Manual

Using Windows 98
Installing Retail Windows 98 Second Edition
10. When the message "Hibernate partition successfully created..." appears on screen,
wait until the message "Operation successful!" appears, then remove the Recovery
CD and press any key to shutdown the computer.
A hibernation partition and a C: partition has been created and formatted for you.
Hewlett-Packard's HW diagnostics software has been placed on the hibernation partition.
To use this HW diagnostics software in the future, press F10 during boot of the system.
11. Boot from the Support Utility Disk you previously created.
12. From the A: prompt, type SYS C:
The system is now ready for copying of the operating system files.
13. Insert the Windows 98 Second Edition retail CD in the CD-ROM drive.
14. Copy the Windows 98 Second Edition installation files to your hard drive by typing
the following commands:
C:
MD \WINDOWS
MD \WINDOWS\OPTIONS
MD \WINDOWS\OPTIONS\CABS
COPY X:\WIN98\*.* C:\WINDOWS\OPTIONS\CABS
15. When the copy process has completed, remove the Windows 98 Second Edition CD
and the support utility disk.

To install retail Windows 98 Second Edition

1. At the C: prompt, type \WINDOWS\OPTIONS\CABS\SETUP /IS
2. Click Continue on the Windows 98 setup screen.
3. Select "I accept the Agreement" at the " Welcome to Windows 98 Setup" screen and
click Next.
4. Enter the Product Key, then click Next.
The Product Key is located on the Certificate of Authenticity that you received with your
retail version of Windows 98 Second Edition.
5. When prompted, select Other Directory and click Next.
6. Enter C:\WINDOWS for the path, click Next.
7. Click Yes to continue with the specified directory. (This directory was created
previously.)
114 Corporate Evaluator's Guide