Setting Up Your Computer; To Install The Battery; To Connect Ac Power - HP OMNIBOOK XE3 Evaluator Manual

Setting Up Your Computer

WARNING

To install the battery

Your computer is shipped with the battery installed. If the battery has been removed, you
can install it by inserting it into the battery bay on the bottom of your computer. Insert the
back edge first, as shown, then press down the front edge until the battery latch clicks
shut.
Once you have installed the battery, connect the AC adapter to the computer and
recharge the battery while you work. You can also replace a low battery with another that
is more fully charged.
Do not mutilate, puncture, or dispose of batteries in fire. A battery can burst or explode,
releasing hazardous chemicals. A rechargeable battery must be recycled or disposed of
properly.

To connect AC power

Plug in the AC adapter, then connect the AC adapter to the rear of the computer. The
battery starts charging.
Introducing the Notebook Computer
Setting Up Your Computer
Corporate Evaluator's Guide 21