Initialize The Ice Terminal - Hypercom ICE 5000 Hardware And Installation Operators Manual

Chapter 3

Initialize the ICE Terminal

After the terminal receives a new program load, an initialization is required to start the terminal
operations. In other cases such as a new card type, an initialization is requested to update the terminal
parameters. An initialization takes approximately 30 seconds to complete.
During an initialization, the terminal automatically connects to the initialization host to receive the
downloading of the initialization parameters, known as the terminal profile .
Step-by-Step
To initialize an ICE terminals:
Step Action
After a program load, the terminal displays the following
prompt.
Touch Initialize on the terminal display.
1
2 Touch Yes. The following screens appear.
The terminal dials the host.
The terminal sends request information to the host.
The transaction is complete.
3-4 ICE 5000 and 5500 Hardware and Installation Operators Manual
Terminal response
TERMINAL
TESTS SUPERVISOR
INITIALIZE
CORRECT?
YES OR NO
Dialing now
Processing now
Transaction Complete
The terminal displays
the Idle prompt.
940184-003, rev. B
MAIN
SETUP
COMMS
COMMS