Introduction; Guide Organization; Who Should Use This Guide; Other Documentation - Hypercom ICE 5000 Hardware And Installation Operators Manual

Introduction

The ICE 5000 and 5500 Hardware and Installation Operators Manual is a comprehensive guide to
working with Hypercom
The ICE 5000 and 5500 terminals are part of the Hypercom Interactive Consumer Environment (ICE)
family of touch-screen-based terminals and peripherals. All ICE terminals support traditional terminal
functions as well as PIN pad and signature capture functionality. The ICE family employs a modular
concept. The basic ICE unit is a multifunction peripheral for either a T7x terminal or ECR. With its
printer and modem module attached, it becomes a fully-functional terminal and PIN pad.

Guide Organization

The guide contains the following chapters:
n
Chapter 1, Hardware Information: General descriptions of hardware required to operate the
ICE 5000 or 5500 terminal
n
Chapter 2, Installation Procedures: Step-by-step instructions for starting the ICE 5000 or
5500 terminal
n
Chapter 3, Setup Procedures: Step-by-step instructions for procedures including
configuration, program load, initialization, and paper loading
n
Chapter 4, Wireless POS Terminal Interface: Descriptions and step-by-step instructions for
operating the 900 MHz wireless POS terminal interface

Who Should Use This Guide

This guide is intended for network administrators-merchants-operators-technicians or those who
oversee the configuration and daily maintenance of the various networks.

Other Documentation

When working with the ICE 5000 or 5500 terminal, the ICE 5000 PIN Pad Loader Operators Manual
may be useful as reference material.
940184-003, rev. B
®
ICE 5000 and 5500 terminals.
Hypercom Corporation xiii