Table of Contents
Advertisement
`
Setting up the Date and Time
These instructions show you, in detail, how to set the date and time that will print
on each fax that you send. To do this, you will use menus, buttons and the keypad on
the front panel. There are several ways to use buttons and keys with the
HP LearnFAST User Interface. The instructions in this guide show you one, easy
method.
Follow the instructions below by first reading the text in the Do This column, then
pressing the buttons and keys in the Using These Buttons column. Check to see that
the display shows what you see in the To Display column.
If you want to stop and start over, press the Stop button.
Display the Menu
Press the Menu button
When you display the menu,
there are 8 options available.
Press the down arrow to
browse down to 6: Settings. If
you pass it, press the up
arrow.
Choose Settings
Press the Enter key. Note
that the display has changed.
Choose 01: Date & Time
Press the Enter key. Note
that the display has changed.
Continued on the next page
12
Using These Buttons
Do This
To Display
Menu Options (1-8)
1:Scan & Send
Menu Options (1-8)
6:Settings
Settings (1-18)
01:Date & Time
Date (MM/DD/YYYY)
[Aug]08/01/1994
Advertisement
Table of Contents
