HP 700 User Manual page 64

Hewlett-packard fax user's guide
Hide thumbs Also See for 700:
Table of Contents

Advertisement

2
Header Location
The factory default for Header Location is Outside Fax Area. The name and
number you enter for this fax are printed at the top of each fax you send. You
can change the location for the header to Inside Fax Area.
2
Paper Size
The factory default for Paper Size is Letter (U.S.). Change this to Legal (U.S.),
or A4 (Metric), when you change the paper loaded for faxes and copies.
The dimensions for these sizes are:
Letter (U.S.)
.
8.5 in by 11 in
Legal (U.S.)
.
8.5 in by 14 in
A4 (Metric)
. .
210 mm by 297 mm
2
Print Reduction
The factory default for Fax Reduction is Automatic. All incoming faxes are
automatically reduced for best fit on one sheet of paper. If the fax can not fit on
one sheet, it is automatically printed on two sheets. You can change Fax Print
Reduction to Fixed and set the reduction percentage within the range of 70% to
100%. The factory default is 94%. For example, if you want to receive faxes
that are the same size as the original document, set Fax Reduction to Fixed, and
set the reduction percentage to 100%.
The factory default for Copy Reduction is 100%. You can change Copy
Reduction to a reduction percentage within the range of 70% to 100%.
2
Adjust Volume
The factory default for volume is Soft. You can adjust Ring Volume, Monitor
Volume (the monitor allows you to hear dialing and transmission) and Key
Volume. Each can be set to Off, Soft, Medium, or Loud.
2
Automatic Redial
The factory default for Automatic Redial is Yes. When the line you are trying to
reach is busy, the fax automatically redials. You can set the number of times
that the fax attempts redials within the range of one to 15. If you don't want to
redial automatically, set Automatic Redial to Off.
2
Reset to Defaults
You can return all settings to the factory default. Use this option in the settings
menu when you want to clear all of the settings made in your fax and reset them
to the factory defaults. One-Touch and Auto Dial numbers are not reset.
59

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fax-750Fax-700

Table of Contents