Table of Contents
Advertisement
Displaying images on a TV
Images in your camera can easily be displayed as a slideshow
on almost any TV (television).
NOTE
If you are using the HP 8886 camera dock to do this
task, see the
1
To connect the camera directly to a TV, you need an A/V
(Audio/Video) cable. The A/V cable is included in the
HP 8886 camera dock kit, or may be purchased separately
(see
Purchasing camera accessories
2
Your camera will send either an NTSC or PAL video signal
to a TV. The NTSC format is used primarily in North
America and Japan, while the PAL format is used primarily
in Europe. This setting is done for you when you set the
language of the camera. If you want to change the video
signal format, change the
Setup
menu. See
3
Your camera will be the source for the TV signal (just like a
VCR or a camcorder), so you must set the TV to take video
input from an external video source (your camera) instead
of the antenna or cable TV. Refer to the TV user's manual for
directions on how to do this.
4
Turn on the camera, then
connect the A/V cable to the
A/V inputs on the TV and to
the TV connector on your
camera.
Chapter 5: Unloading, printing, and displaying images
HP 8886 Camera Dock User's
TV Configuration
TV configuration
Manual.
on page 102).
setting in the
on page 70.
65
Advertisement
Table of Contents
