Using The Self-Timer Settings; Using The Burst Setting; Steady Photo - HP Photosmart R930 series User Manual

Using the Self-Timer settings

The
second delay.
1. While in the
2. In the
touch OK, then touch
more details on selecting options in the
menus, see
3. Set the camera on a tripod or stable surface.
4. Frame the subject in the Image Display.
5. Press the Shutter button halfway down to lock focus and exposure. When the focus
brackets turn green, press the Shutter button all the way down.
The camera begins the 10-second countdown, then takes the picture or begins
recording the video clip. If you chose
picture a few seconds after the first.
6. If you are recording a video clip, press the Shutter button to stop recording.
TIP:
stable surface, then press the Shutter button all the way down. The camera locks
focus and exposure just before the end of the countdown, allowing you time to place
yourself in the scene.
The
is taken.

Using the Burst setting

Burst allows you to take two or more pictures as quickly as possible when you press
and hold the Shutter button all the way down.
1. While in the
2. In the
Capture.
3. Frame the subject, then press the Shutter button halfway down to lock the focus and
exposure. Then press the Shutter button all the way down and hold it. The camera
takes pictures as quickly as possible until you release the Shutter button or the
camera runs out of memory.
The Image Display remains off during the burst capture. After the burst images have been
taken, each image appears one at a time in Instant Review (see
on page
individual images, see
The
default Off setting when you turn off the camera.

Steady Photo

Steady Photo minimizes blur in pictures you take under dim lighting conditions.
When the camera detects motion, either because the camera is shaking slightly or the
subject is moving, it increases the ISO speed (see
Downloaded from ManualsCamera.com Manuals
Self-Timer allows you to take one or two pictures or one video clip after a 10-
Picture Capture or
Self-Timer menu, touch
"Using the Picture Capture and Video Record menus" on page
If you want to include yourself in the picture, place the camera on a tripod or
Self-Timer setting resets to the default Off setting after the picture or video clip
Picture Capture Menu, touch
Burst.
Burst menu, touch On, touch OK, then touch
12). You can delete the entire burst sequence in Instant Review. To delete
"Deleting images" on page
Burst setting remains in effect until it is changed again, or until it resets to the
Video Record Menu, touch
On (for one shot) or
to return to Picture Capture or
Picture Capture and
On-2 Shots, the camera takes the second
Using the Picture Capture and Video Record menus
On-2 Shots (
Video Record. For
or to display
to return to
"Instant Review"
25.
"ISO speed" on page
Self-Timer.
only),
Video Record
18.
Burst. Touch
Picture
22). In this
21