Turning Off The Presenter 1280 Monitor; Figure 1-6 Locating The Sleep Button - Silicon Graphics Presenter 1280 Owner's Manual

Turning Off the Presenter 1280 Monitor

Turning Off the Presenter 1280 Monitor
If you log out and do not disconnect Presenter 1280's cables, after thirty
minutes of inactivity the workstation's power saving feature automatically
turns off Presenter 1280 (unless you have disabled power saving, or changed
the default time). To restore power, move the mouse or press a key on the
keyboard.
If you want to turn off Presenter 1280 without waiting for power saving, you
can turn it off by pressing the Sleep button on the rear, as shown in
Figure 1-6. When you turn Presenter 1280 off this way, the LED on its base
flashes green (sleep mode). When you're ready to use it again, press the
Sleep button. The LED becomes solid green.
Another way to turn off Presenter 1280 is to turn off the workstation, which
automatically turns off the display.
To workstation
Sleep button
Figure 1-6 Locating the Sleep Button
9