Setting Up Presenter 1280 On The Dukane Overhead Projector - Silicon Graphics Presenter 1280 Owner's Manual

Setting Up Presenter 1280 on the Dukane Overhead Projector

Setting Up Presenter 1280 on the Dukane Overhead Projector
Caution: The Presenter 1280 monitor is designed to function at maximum
performance and reliability with the 28A682 Dukane overhead projector. It
is possible to use Presenter 1280 with other projectors; however, cooling of
the display, stable mounting, and brightness and completeness of the
projected image may all be compromised. A high brightness overhead
projector without proper cooling of the display may cause permanent
damage to Presenter 1280.
Follow the steps below to set up Presenter 1280 on the Silicon Graphics
customized Dukane 28A682 overhead projector.
You can use Presenter 1280 on the Dukane 28A682 or the Dukane
Note:
28A681 overhead projectors. However the Dukane 28A681 projector does
not have a speaker, and therefore the audio function is not available. Also,
the viewing area is compromised.
1. Remove the overhead projector from its carrying case.
2. Raise the arm to its upright position, using the illustration on the
overhead projector as a guide.
3. Lock the arm in place with the locking knob. See Figure 1-8.
11