Figure 3-2 Removing The Backlight Panel - Silicon Graphics Presenter 1280 Owner's Manual

Caution: It's important that you use the contents of the cleaning kit
provided in this package to clean the display. Using other substances,
abrasive cleaners, or cleaning pads to clean the unit will scratch or damage
the display's surface.
There is no need to turn off the monitor or remove the external cables before
cleaning, as long as you don't spray directly on the Presenter 1280's surface.
1. Spray the cleaning liquid lightly on the cloth provided in the cleaning
kit. Do not spray directly on the coated glass surface, as the liquid may
drip inside the unit and damage the components.
2. Wipe the front coated glass surface of the Presenter 1280 gently with the
cloth.
3. Remove the backlight panel, if it's not already removed.
Place Presenter 1280 face down on a flat surface.
Press in the latches on either side of the backlight panel, and lift it
up, as shown in Figure 3-2.
Latches
Figure 3-2 Removing the Backlight Panel
4. Use the cloth to wipe the coated glass surface gently.
Cleaning and General Care of the Presenter 1280 Monitor
31