Table of Contents
Advertisement
Electrical Requirements
Saw Blade (Included) Diameter/Type
Arbor Size
Crosscut Capacity
Blade Tilt Capacity
Positive Stops
Overall Table Size
Accessories Included
When unpacking, check to make sure all the parts shown on the Parts list on
page 23 are included. If any parts are missing or broken, please call Harbor Freight
Tools at the number shown on the cover of this manual as soon as possible.
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside of the
front cover. Keep this manual and invoice in a safe and dry place for future reference.
WARNINg! Read all instructions
Failure to follow all instructions listed below may result in electric shock,
fire, and/or serious injury. The term "power tool" in all of the warnings listed
below refers to your line-operated (corded) power tool or battery-operated
(cordless) power tool.
1.
Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2.
Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite flammables.
SKU 91995
For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
120 V / 60 Hz / 1800 Input Watts.
15.0 AMPs Start Up / 5300 RPM No Load.
Three Prong, Grounded, Power Cord Plug.
Power Switch Type: Squeeze Type.
10" Diameter / 60 Teeth.
7,000 Maximum RPM.
5/8" Diameter.
4-11/16" x 2-15/16" @ 90°.
4-11/16" x 1-9/16" @ 45°.
0° - 45° Left and Right.
0°, 15°, 22.5°, 30°, 45° Left and Right.
18-1/8" W x 5-3/8" L x 3-1/8" H.
Dust Bag / Extension Holders (Qty. 2).
UNPACKINg
SAVE THIS MANUAl
gENERAl SAFETY RUlES
SAVE THESE INSTRUCTIONS
WORK AREA
E105017
E105017
Rev 07k
Page 2
Hide quick links:
Advertisement
Table of Contents
