Setting Levels Diagram - Omron E5CSV User Manual

Setting Levels Diagram

Setting Levels Diagram

This diagram shows all of the setting levels. Some parameters are not displayed depending on the
protect level setting and the conditions of use.
Control is stopped for each of the initial setting levels.
：
INIT switch: ON
：
Protect switch: OFF
Power ON
U Key
Operation
level
*
Initial setting
level O U T
- 0 -
S P A LM A LM 1 2
After selecting the mode
using the U/D Keys,
Press the M
press the M Key.
Key for at
least 3 s.
Initial setting
levels (1) to
(5)
＊ If there is no key input for 5 s or longer, a software reset will be performed to change to the operation
level.
Operation level
Initial setting level
A-14
Control in progress
Control stopped
Level change
Control in Control
progress stopped
−
○
−
○
○: Setting enabled