Chapter 2: VTrak Installation
This chapter covers the following topics:
•
Unpacking the VTrak (below)
•
Mounting VTrak M610i in a Rack (page 10)
•
Mounting VTrak M310i or M210i in a Rack (page 12)
•
Installing Disk Drives (page 15)
•
Making Management and Data Connections (page 18)
•
Making Serial Cable Connections (page 20)
•
Connecting the Power (page 21)
Unpacking the VTrak
The VTrak box contains the following items:
•
VTrak Unit
•
Quick Start Guide
•
Null Modem Cable
•
Left and right center-mount
brackets
•
Left and right mounting rails
The electronic components within the VTrak disk array are
sensitive to damage from Electro-Static Discharge (ESD).
Observe appropriate precautions at all times when handling the
VTrak or its subassemblies.
Use the following categories of network cables with VTrak:
•
Cat 6, preferred
•
Cat 5E, minimum
•
Screws for disk drives
(36 for M210i; 52 for M310i; 70 for
M610i; including 4 spares)
•
1.5m (4.9 ft) Power cords (2 for US
and 2 for Europe)
•
CD with SNMP files, Product
Manual and Quick Start Guide
Warning
Important
9