Viewing Vlan Entries; Creating A Vlan Entry - Promise VTRAK M610i Product Manual

VTrak M610i, M310i, M210i Product Manual

Viewing VLAN Entries

To view the current VLAN entries:
1. From the Main Menu, highlight Network Management and press Enter.
2. Highlight VLAN and press Enter.
The list of VLAN entries appears. The Member Interface refers to an iSCSI
data port or to the link aggregate number.

Creating a VLAN Entry

This feature enables you to create a virtual local area network (VLAN) using the
iSCSI data ports on your subsystem.
If you plan to aggregate the iSCSI ports, create a link aggregation before you
create the VLAN. See "Creating a Link Aggregation Entry" on page 166.
If you plan to use jumbo frames for the VLAN, enable jumbo frames for the iSCSI
ports before you create the VLAN. See"Making iSCSI Data Port Settings" on
page 163.
To create a VLAN entry:
1. From the Main Menu, highlight Network Management and press Enter.
2. Highlight VLAN and press Enter.
3. Highlight Create New VLAN Entry and press Enter.
4. Highlight Member Interface and press the spacebar to toggle through iSCSI
Port 1 or Port 2.
5. Highlight VLAN Name and type a name for your VLAN.
Maximum of 15 characters. Use letters, numbers, space between words and
underscore.
6. Highlight VLAN Tag and type a tag number.
Use 2 though 4094.
7. Highlight Jumbo Frame and press the spacebar to toggle between Enabled
and Disabled.
8. Highlight IP Address and type an IP address for your VLAN.
9. If you want to change the subnet mask, highlight Subnet Mask, press the
backspace key to erase the default value, then enter a new value.
10. If you want to change the TCP port number, highlight TCP Port Number,
press the backspace key to erase the default value, then enter a new value.
11. Press Ctrl-A to save your settings.
164