VTrak M610i, M310i, M210i Product Manual
Managing the Network Connection
Network Management deals with network connections and settings for the
Management Port:
•
Making Management Port Settings (page 162)
•
Making iSCSI Data Port Settings (page 163)
•
Viewing VLAN Entries (page 164)
•
Creating a VLAN Entry (page 164)
•
Changing a VLAN Entry (page 165)
•
Deleting a VLAN Entry (page 165)
•
Viewing Link Aggregation Entries (page 165)
•
Creating a Link Aggregation Entry (page 166)
•
Changing a Link Aggregation Entry (page 166)
•
Deleting a Link Aggregation Entry (page 166)
Making Management Port Settings
Before you change settings, please see "Choosing DHCP or a Static IP Address"
on page 24.
Making Automatic Settings
1.
From the Main Menu, highlight Network Management and press Enter.
2.
Highlight the Management port in the list and press Enter.
3.
Highlight NetMgmt Ethernet Port Settings and press Enter
4.
Highlight DHCP and press the spacebar to toggle to Enabled.
5.
Press Ctrl-A to save your settings.
Making Manual Settings
1.
From the Main Menu, highlight Network Management and press Enter.
2.
Highlight the management port in the list and press Enter.
3.
Highlight NetMgmt Ethernet Port Settings and press Enter
4.
Highlight DHCP and press the spacebar to toggle to Disabled.
5.
Highlight each of the following and press the backspace key to erase the
current value, then type the new value.
•
IP Address
•
Subnet Mask
•
Gateway IP Address
•
DNS Server IP Address
6.
Press Ctrl-A to save your settings.
162