Working With Software Management; Making Email Settings - Promise VTRAK M610i Product Manual

VTrak M610i, M310i, M210i Product Manual

Working with Software Management

Software Management includes the following functions:
• Making Email Settings (page 184)
• Making SLP Settings (page 185)
• Making Webserver Settings (page 185)
• Making Telnet Settings (page 186)
• Making SNMP Settings (page 186)
• Managing SNMP Trap Sinks (page 187)
• Making CIM Settings (page 188)
• Making Netsend Settings (page 188)
• Managing Netsend Recipients (page 189)

Making Email Settings

By default, Email service is set to Automatic and its normal status is Started.
To make Email service settings:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight Software Management and press Enter.
3. Highlight Email and press Enter.
4. Highlight Startup Type and press the spacebar to toggle between Automatic
and Manual.
5. Highlight the following and press the backspace key to erase the current
value, then type the new value:
• Server IP address
• Server Port number – 25 is the default
6. Highlight Authentication and press the spacebar to toggle between Yes and
No.
If you selected Yes, type in a User name and Password in the fields
provided.
7. The following items are optional but recommended. Highlight and press the
backspace key to erase the current value, then type the new value:
• Sender's email address
• Subject Line for the email message
8. Press Ctrl-A to save your settings.
184