Managing The Enclosure; Viewing Enclosure Information; Viewing Power Supply Status; Locating A Power Supply - Promise VTRAK M610i Product Manual

VTrak M610i, M310i, M210i Product Manual

Managing the Enclosure

Enclosure Management includes the following functions:
• Viewing Enclosure Information (page 140)
• Viewing Power Supply Status (page 140)
• Locating a Power Supply (page 140)
• Viewing Blower Status (page 141)
• Viewing Voltage Sensor Status (page 141)
• Viewing Temperature Sensor Status (page 141)
• Setting Temperature Thresholds (page 141)
• Checking the Batteries (page 142)
• Reconditioning a Battery (page 142)
• Locating an Enclosure (page 143)

Viewing Enclosure Information

Enclosure Management includes information, status, settings and location. To
access Enclosure Management:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Enclosure Management and press Enter.
To access FPU VPD information (vital product data on field replaceable units),
highlight FPU VPD Information and press Enter.
To access the current status of the power supplies, blowers, temperature or
voltage sensors, highlight the item you want and press Enter.

Viewing Power Supply Status

To view the status of the power supplies:
1. From the Main Menu, highlight Subsystem Management and press Enter.
2. Highlight Enclosure Management and press Enter.
3. Highlight Power Supplies and press Enter.
The screen displays the operational and fan status of VTrak's two power
supplies. If any status differs from normal or the fan speed is below the Healthy
Threshold value, there is a fan/power supply malfunction. See "Replacing a
Power Supply" on page 204.

Locating a Power Supply

To locate a power supply:
1. From the Main Menu, highlight Subsystem Management and press Enter.
140