Viewing Controller Statistics; Making Controller Settings - Promise VTRAK M610i Product Manual

Viewing Controller Statistics

To view controller statistics:
1. Click the Subsystem
2. Click the Controllers
3. Click the Controller
4. Click the Information tab in Management View and choose Statistics from
dropdown menu.
Clearing Statistics
To clear statistics, see "Clearing Statistics" on page 88.

Making Controller Settings

To make Controller settings:
1. Click the Subsystem
2. Click the Controllers
3. Click the Controller
4. Click the Settings tab in Management View.
5. Make the following settings as needed:
• Enter a name into the Alias field.
Maximum of 48 characters. Use letters, numbers, space between
words, and underscore. An alias is optional.
• Check the SMART Log box to enable the Self-Monitoring, Analysis, and
Reporting System (SMART).
• Enter a polling interval (1 to 1440 minutes) in SMART Polling Interval
field.
• Check the Coercion Enabled box to enable disk drive capacity coercion.
When disk drives of different capacities are used in the same array,
coercion reduces the usable capacity of the larger disk drive(s) in order
to match the smallest capacity drive.
For more information, see "Capacity Coercion" on page 233.
• Select a coercion method from the Coercion Method dropdown menu.
The choices are:
GB Truncate – (Default) Reduces the useful capacity to the nearest
1,000,000,000 byte boundary.
10GB Truncate – Reduces the useful capacity to the nearest
10,000,000,000 byte boundary.
Chapter 4: Management with WebPAM PROe
icon in Tree View.
icon.
icon.
icon in Tree View.
icon.
icon.
93