Locating A Logical Drive - Promise VTRAK M610i Product Manual

5. Highlight Start and press Enter.
If necessary, you can pause and resume or stop and restart the Redundancy
Check. You can use the logical drive while Redundancy Check is running.

Locating a Logical Drive

This feature helps you identify the physical drives assigned to the logical drive
you are working with in the CLU. To locate a logical drive:
1. From the Main Menu, highlight Logical Drive Management and press Enter.
2. Highlight the disk array you want and press Enter.
3. Highlight Locate Logical Drive and press Enter.
The drive status LEDs for the physical drives in this logical drive will blink for
one minute.
Chapter 5: Management with the CLU
161