Managing Controllers; Viewing The Controller; Locating A Controller - Promise VTRAK M610i Product Manual

Managing Controllers

The RAID controller is are the heart of the VTrak subsystem. Controller
Management includes the following functions:
• Viewing the Controller (page 91)
• Locating a Controller (page 91)
• Viewing Controller Information (page 92)
• Viewing Controller Statistics (page 93)
• Making Controller Settings (page 93)

Viewing the Controller

To view information about the controller:
1. Click the Subsystem
2. Click the Controllers
The controller information appears under the Information tab in Management
View. Controller information includes:
• Controller ID (1)
• Alias, if assigned
• Model, if applicable
• Status – OK means normal
• Readiness Status – Active or Standby
• Locate – Click the button to locate the controller. See below
VTrak subsystems, such as the M610i, M310i, and M210i, with only one
controller will always show that the second controller is "Missing."

Locating a Controller

To identify a specific controller in the VTrak subsystem:
1. Click the Subsystem
2. Click the Controllers
3. In Management View, click the Locate Controller button.
4. The Controller Dirty Cache
Controller, will flash for one minute. See the illustrations below.
Chapter 4: Management with WebPAM PROe
icon in Tree View.
icon.
icon in Tree View.
icon.
LED and Status
91
LED, on the back of the