Deleting A Disk Array - Promise VTRAK M610i Product Manual

13. Specify a Stripe size from the dropdown menu.
64 KB, 128 KB, 256 KB, and 1 MB are available. 64 KB is the default.
14. Specify a Sector size from the dropdown menu.
For iSCSI, use the 512 B default. See "Choosing Sector Size" on page 231.
15. Specify a Read (cache) Policy from the dropdown menu.
Read Cache, Read Ahead Cache, and No Cache are available. Read Ahead
is the default.
16. Specify a Write (cache) Policy from the dropdown menu.
Write Back and Write Through (Thru) are available. Write Back is the default.
17. Click the Update button.
A new logical drive is displayed under New Logical Drives.
Repeat the above steps to specify additional logical drives as desired.
18. When you are done specifying logical drives, click the Next button.
Step 3 – Summary
The Summary lists the disk array and logical drive information you specified.
19. To proceed with disk array and logical drive creation, click the Submit
button.
The new disk array appears in the Disk Array List the Information tab.

Deleting a Disk Array

The Disk Arrays–Delete tab enables you to delete existing disk arrays.
To delete a disk array:
1. Click the Subsystem
2. Click the Disk Arrays
3. Click the Delete tab in Management View.
This function does not automatically create a hot spare drive. After
the disk array is created, you can create a hot spare drive for it.
For more information, see "Creating a Spare Drive" on page 126.
If you delete a disk array, you also delete any logical drives that
belong to it, along with the data in those logical drives. Back up
any important data before deleting a disk array.
icon in Tree View.
icon.
Chapter 4: Management with WebPAM PROe
Note
Caution
109