Editing Chaps; Deleting Chaps; Pinging Iscsi Connections - Promise VTRAK M610i Product Manual

Editing CHAPs

To edit an iSCSI CHAP:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI CHAPs and press Enter.
3. Highlight the CHAP you want to edit and press Enter.
4. Highlight Name and press the backspace key to erase the current value,
then type the new value
5. Highlight Type and press the spacebar to toggle between Peer and Local.
Peer is one-way. Local is bi-directional.
6. Highlight Secret and type a name of 16 or more characters.
7. Highlight Retype Secret and type the secret again to verify.
8. Press Ctrl-A to save the CHAP.

Deleting CHAPs

To delete an iSCSI CHAP:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight iSCSI CHAPs and press Enter.
3. Highlight the CHAP you want to delete and press Enter to mark it.
The mark is an asterisk (*) to the left of the listing.
4. Highlight Delete Marked Entries and press Enter.
5. Press Y to confirm the deletion.

Pinging iSCSI Connections

This function enables you to ping other network nodes (PCs, servers, etc.)
through VTrak's iSCSI ports.
To ping an iSCSI connection:
1. From the Main Menu, highlight iSCSI Management and press Enter.
2. Highlight Ping and press Enter.
3. Type the IP address you want to ping in the IP Address field.
4. Highlight Ping Through and press the spacebar to select an iSCSI port.
5. Highlight Ping and press Enter.
The results of the ping are displayed on the screen.
Chapter 5: Management with the CLU
171