Creating A Link Aggregation Entry; Changing A Link Aggregation Entry; Deleting A Link Aggregation Entry - Promise VTRAK M610i Product Manual

VTrak M610i, M310i, M210i Product Manual

Creating a Link Aggregation Entry

This feature enables you to aggregate the iSCSI data ports on your subsystem to
increase bandwidth.
If an iSCSI port is part of a VLAN, you must delete the VLAN entry before you can
use the iSCSI port to create a link aggregation. See "Deleting a VLAN Entry" on
page 165.
To create a link aggregation entry:
1. From the Main Menu, highlight Network Management and press Enter.
2. Highlight Link Aggregation and press Enter.
3. Highlight Create New Link Aggregation Entry and press Enter.
4. Highlight Trunk ID and type a value.
Use the numbers 1 through 32.
5. Highlight Master Port and press the spacebar to toggle to one of the iSCSI
port numbers.
6. Highlight Slave Port and press the spacebar to toggle to the other iSCSI port
number.
7. Press Ctrl-A to save your settings.

Changing a Link Aggregation Entry

1. From the Main Menu, highlight Network Management and press Enter.
2. Highlight Link Aggregation and press Enter.
3. Highlight a Link Aggregation entry in the list and press Enter.
4. Highlight Master Port and press the spacebar to toggle to one of the iSCSI
port numbers.
5. Highlight Slave Port and press the spacebar to toggle to the other iSCSI port
number.
6. Press Ctrl-A to save your settings.

Deleting a Link Aggregation Entry

To delete a link aggregation entry:
1. From the Main Menu, highlight Network Management and press Enter.
2. Highlight Link Aggregation and press Enter.
3. Highlight a Link Aggregation entry from the list and press the spacebar to
mark it with an asterisk (*).
4. Highlight Delete Marked Entries and press Enter.
5. Press Y to confirm the deletion.
166