Connection To Network - Fujitsu IP-9610 Hardware User's Manual

Table of Contents

Chapter 2 Installation and Connection

2.6

To connect IP-9610 to a LAN device, connect the LAN device to the LAN communication port

[CONSOLE/LAN1/LAN2] of IP-9610 using a LAN cable (UTP cable). The LAN communication

port specification of IP-9610 is 10BASE-T/100BASE-TX /1000BASE-T for CONSOLE, LAN1 and

LAN2.

The figure below shows the connection method.

For details about connectors and cables, see Section 4.2, "Cable and Connector Details."

NOTE:

For electrical specifications, see Appendix 2.3, "Function Specifications."

NETWORK/CONSOLE

HUB, Router, etc

Please do not provision the IP address below.

LAN/Console ports;

・ IP address commonly unused（0.0.0.0，255.255.255.255，etc...）

・ Loop back address (127.xxx.xxx.xxx)

・ Class D and Class E addresses

・ IP address already used

Console port only;

･IP address (169.254.xxx.xxx) used when LAN port cannot obtain IP address

normally from DHCP server.

For more information, see IP-9610 Software User's Guide.

IP-9610

Connection to Network

CONSOLE

Figure Connection to network

CAUTION

Client PC

Table of Contents