Table of Contents
Advertisement
LED name
PWR
G Power ON
RDY
G Normal operation
O Maintenance mode
LAN1
(IP=10.0.0.1)
LAN2
(IP=10.0.0.2)
CONSOLE
(IP=192.168.255.253)
ALM
R Equipment alarm
IN DWN
O Video/Audio/Network
input down/fault
LINK/ACT
G LINK established
[LAN1]
100M/1000M
G 100BASE operation
[LAN1]
LINK/ACT
G LINK established
[LAN2]
100M/1000M
G 100BASE operation
[LAN2]
LINK/ACT
G LINK established
[CONSOLE]
100M/1000M
G 100BASE operation
[CONSOLE]
G: Green, O: Orange, R: Red
Name
Button type
POWER
Locker button
ON
Blinking
---
Starting up
Maintenance mode
starting up
Equipment alarm
Video/Audio/Network
input down/fault
LAN packets detection Cable disconnection
1000BASE operation
LAN packets detection Cable disconnection
1000BASE operation
LAN packets detection Cable disconnection
1000BASE operation
Specifications
Power ON/OFF
61
OFF
Power OFF
Software inactive
Blink interval: 0.5s
Maintenance mode
(Cancel button
startup):
LAN subnet mask
(255.0.0.0)
CONSOLE subnet
mask
(255.255.255.252)
Normal operation
When the device
alarm is generated, a
part of alarm can be
changed to lighting,
blinking, and turning
off by the setting.
Normal operation
The alarm display by
this LED can select
lighting, blinking,
and turning off
excluding the LED
lighting by the
temperature anomaly.
10BASE operation
10BASE operation
10BASE operation
Behavior
Appendix
Remarks
IP-9610
Advertisement
Table of Contents
