Connection To Dvb-Asi Output Device - Fujitsu IP-9610 Hardware User's Manual

Chapter 2 Installation and Connection

2.4.2 Connection to DVB-ASI Output Device

When IP-9610 operates with the decoder mode operates, the BNC cable is connected to DVB-ASI
IN as shown in the figure below. The signal is terminated in 75Ω.
For details about connectors and cables, see Section 4.2, "Cable and Connector Details."
NOTE:
For electrical specifications, see Appendix 2.3, "Function Specifications."
Figure Connection to DVB-ASI output device
IP-9610
24