Installation Preparations - Fujitsu IP-9610 Hardware User's Manual

4.1
4.1
A type of IP-961 0 installation work is shown below.
When constructing a system that uses IP-9610, consideration must be given so that its boundary
between IP-9610 and other devices is similar to that shown in the above figure. Since the type of work
may change depending on the system, procure equipment and perform work based on consultations
with a system designer.

Installation Preparations

IP-9610
BNC
(1) Coaxial cable
BNC
(2) Coaxial cable
BNC
(3) Coaxial cable
BNC
(4) Coaxial cable
BNC
(5) Coaxial cable
D-sub9
(6) RS-232C cable
D-sub9
(7) RS-232C cable
(8)Audio adapter cable
RJ25
RJ45
(9) LAN cable
RJ45
(10) LAN cable
RJ45
(11) LAN cable
(12) Power cable
Cables are depended on the option board.
Please refer user's guide of each option board.
External device
XLR
XLR
(separate order)
37
Chapter 4 Cable specifications
DVB-ASI output device
DVB-ASI input device
DVB-ASI input device
Reference clock source
Reference clock source
Device with RS-232C interface
Device with RS-232C interface
Analog audio output device
(mic, etc)
Analog audio input device
(speaker, etc)
Device with LAN interface (HUB, etc)
Device with LAN interface (HUB, etc)
Device with LAN interface (HUB, etc)
Power source 100-240VAC
IP-9610