Connection To External Sync(Ref); Connection To External Sync (Ref) - Fujitsu IP-9610 Hardware User's Manual

Chapter 2 Installation and Connection
2.3
2.3
There is each of input and output interfaces for connection to the external sync (REF).
REF input
Connect incoming external sync to REF IN by using coaxial cable with BNC connector. The signal
is terminated in 75 ohm.
REF OUT
Connect coaxial cable with BNC connector to REF OUT for outgoing external sync signal. The
signal is output in 75 ohm.
NOTE:
Details." For electrical specifications, see Appendix 2.3, "Function Specifications."
IP-9610

Connection to External Sync(REF)

For details about connectors and cables, see Section 4.2, "Cable and Connector
Figure Connection to External Sync input, output devices
22