6Kqf-2Mst Combo Module - GarrettCom Magnum 6KQ Hardware Installation And User's Manual

Magnum 6KQ Managed Field Switch Installation and User Guide
Note: The 6KQ Port modules are not identical to the port modules used in other 6K
products such as the 6K25e and 6K16V. For information about other 6K
products, please see the applicable manual. For a list of 6KQ Port Modules,
refer to Section 1.2
Each 6KQ Port Module (PM) is individually described in the following sections.
5.2.1 6KQF-2MST, 2@100Mb multi-mode FX-ST "twist lock" Combo
Module
The Magnum 6KQ-2MST is two port ST fiber module at 100MB. The module
is equipped with dual-mode ST-type connectors and dual speed copper ports. The ST-
connector functions as a fiber optic transceiver to support 100BASE-FX network
segments. When installed in a Magnum 6KQ Managed Switch, the copper port supports
the standard distance 100m on each port and the fiber port supports fiber optic cable
distances up the IEEE-
standard 100Mbps distance
limits, i.e., typically 2km at
full-duplex and 412m at half-
duplex.
Each port has an
Activity (ACT) LED
indicating packets being
received. A Link (LK) LED indicates proper connectivity with the remote device when
lit, and FDX/HDX LED to indicate full-duplex mode when lit (half-duplex when off).
5.2.1a 6KQ2-10ST, 2@10Mb multi-mode FX-ST "twist lock" Module
The 6KP6-RJ10ST is a
two port Fiber module that looks
similar to the 100MbFiber module
with the exception of 10Mb speed
at the ST fiber module. The ST-
connector functions as a fiber optic
transceiver to support 10BASE-FX
network segments. When installed
in a Magnum 6KQ Managed Switch, the fiber port supports fiber optic cable distances up
www GarrettCom com . .
6KQF- 2 @100 Mb ST Fiber
3
ACT
F/H
TX
1
1
3
F/H
6KQF-2MSC, 2 @100 Mb SC Fiber
3
ACT
F/H
1
36
2
ACT
F/H
RX
TX LK
LK
2
LINK
Activity
ACT
F/H
TX
TX LK RX
1 2
3
F/H
(04/07)
RX
2
LK RX
Activity