Clearing Mistakes; Printing Duplicate Receipts; And Z Totals - Ingenico iCT220 User Manual

21. Clearing Mistakes

If a mistake is made when entering numbers or letters, press the YELLOW button until the incorrect
numbers or letters have been removed or press the RED button to erase all input. Now re-key the
correct entry.

22. Printing Duplicate Receipts

At the READY prompt press the MENU button.
1.
Using the
then press the GREEN button.
Press the GREEN button to print a duplicate receipt. It
2.
is not an exact copy of either a customer or merchant
receipt and has Duplicate Receipt printed on it.
23. X and Z Totals
X Totals can be printed at any time throughout the day and give a sub-total of all transactions
performed. X totals do not reset the totals within the terminal.
Z Totals show the total of all transactions processed through the terminal for each card company since
the last Z Totals were performed. Once Z Totals have been completed the totals within the terminal are
reset to zero. X Totals will also be reset.
Z Totals are not connected to your Banking totals.
1. At the READY prompt, press the MENU button twice. The
TOTALS option will be highlighted and then press the
GREEN button and the TOTALS MENU will be displayed.
Use the keys and press the GREEN button when
2.
the X-TOTALS is highlighted.
You will then be asked to swipe your Supervisor Card or
3.
enter your Supervisor code.
Press the GREEN button to proceed or the YELLOW
4.
button to cancel.
The terminal will print the report. Press the MENU
5.
button if you wish to reprint the report. If not, press the
GREEN button and the terminal will return to the READY
prompt.
Page 30
key, highlight DUPLICATE RECEIPT and
TRANSACTION MENU
Print Chip Data
Reversal
Duplicate Receipt
EFT
Duplicate Receipt?
Enter = YES Clear = NO
SYSTEM MENU
Totals
Print Function Codes
Select Function
TOTALS MENU
End-of-Day Banking
Z-Totals
X-Totals
EFT
X-Totals? (or Z-Totals?)
Enter = YES Clear = NO
Tear Off
TOTALS RECEIPT
Press ENTER if OK
Press Menu to Reprint