Ingenico iCT220 User Manual page 28

8. The signed receipt should be kept for your records. The
terminal will now print a receipt for the customer.
Pass the receipt to the customer and the transaction is
complete.
9. If this is a mail order transaction, the YELLOW button
will be pressed when asked if the customer is present.
If not entered earlier in the process, key in the amount
of the transaction and press the GREEN button.
IF YOUR TERMINAL IS CONFIGURED FOR CSC/AVS (A CARDHOLDER VERIFICATION SERVICE) PROCEED AS
FOLLOWS.
If you see this prompt, key in the 3 digit security code,
which can be found on the signature strip on the back of the
customer's card. Now press the GREEN button.
PLEASE NOTE: The security code for American Express cards is a four digit code and can be found on the
front of the card.
Your terminal will then prompt you to do the following:
Enter the numeric digits from the customer's Post Code, (i.e
EH11 9YE would be entered 119) and then press the GREEN
button.
Enter the customer's house number, ( i.e Flat 5, 29 High
Street would be entered 529) and then press the GREEN
button.
10. The terminal will now dial out for authorisation and the
authorisation code will be displayed. Press the GREEN
button.
The terminal will display the results of the address check. The result will be printed on the receipts.
The security message will advise the response for any information entered at the Security Code,
Address and Post Code prompts.
Message Text
ALL MATCH
SEC CODE MATCH ONLY
ADDRESS MATCH ONLY
NO DATA MATCHES
DATA NOT CHECKED
<transaction type>
Is customer present?
Enter = YES
<transaction type>
Key in Security Code:
and then press ENTER
Key in Numerics From
The Post Code:
and then press ENTER
Key in First Five Digits
Of the Address:
and then press ENTER
<transaction type>
AUTH CODE: nnnnn
<Acquirer Name>
press ENTER
Result
ALL DATA ENTERED IS CORRECT
ONLY THE SECURITY CODE IS CORRECT
ONLY THE ADDRESS IS CORRECT
NONE OF THE DATA ENTERED IS CORRECT
THE DATA HAS NOT BEEN CHECKED
Clear = NO
Page 27