Replacing The Cover - Cisco 7401ASR Installation And Configuration Manual

Replacing the SDRAM DIMM
Press both spring latches outward to release the DIMM. See
Step 3
Gently pull the DIMM free from the DIMM socket, taking care not to touch the pins that insert into the
Step 4
socket. Place the DIMM in an anti-static bag.
Forcing the DIMM into the socket can damage the DIMM. Use the notches on the DIMM to align the
Caution
DIMM with the DIMM socket before inserting it.
Step 5 Locate the notches and align the DIMM with the DIMM socket.
Gently insert the new DIMM, taking care not to damage the pins on the edge of the DIMM.
Step 6
Press the spring latches to lock the DIMM in place.
Step 7

Replacing the Cover

Step 1 Replace the cover; lower it onto the chassis and push the cover toward the rear of the chassis to lock it
in place.
Step 2 Replace and tighten the four cover screws.
Replace the Cisco 7401ASR router in the rack. See
and Cabling"
For memory specifications and configurations, see Appendix A, "Specifications" the
Specifications and Configurations" section on page
Cisco 7401ASR Installation and Configuration Guide
1-14
for instructions.
Chapter 1 Overview and Parts Installation
Figure 1-10.
Chapter 2, "Rack-Mounting, Tabletop Installation,
A-3.
"Memory
OL-5419-01 B0