Using The Show Pxf Info Command; Using The Show Pxf Interface Command; Using The Show Pxf Feature ? Command And Subcommands - Cisco 7401ASR Installation And Configuration Manual

Using the show pxf Commands

Using the show pxf info Command

The following is an example of the show pxf info command with sample output:
Router# show pxf info
pxf:tmc type TMC ASIC Pass1 (no ECC) revision 3
ucode:filename 'system:pxf/ucode0' revision 1.1
state: is running, number of starts 1
uptime:15:24:18
Memory Configuration:
Bank Name
tmc internal memory column 0
bytes
tmc column 0 memory bank 0
tmc internal memory column 1
tmc column 1 memory bank 0
tmc internal memory column 2
bytes
tmc column 2 memory bank 0
tmc internal memory column 3
bytes
tmc column 3 memory bank 0

Using the show pxf interface Command

The show pxf interface command provides a summary of the interfaces in the router and which PXF
features or capabilities are enabled on these interfaces. The following is an example of the
show pxf interface command:
Router# show pxf interface
Intf
Fa0/0
Et1/0
Et1/1
Et1/2
Et1/3
Se2/0
Se2/1
Se2/2
Se2/3
Fa3/0
PO4/0
AT5/0

Using the show pxf feature ? Command and Subcommands

The following is an example of the feature-specific show pxf feature ? command with sample output:
Router# show pxf feature ?
cef
nat
Cisco 7401ASR Installation and Configuration Guide
B-6
I/f # Attributes
3 Raw, Encap, QoS(Cr 0, Thrsh 2, Max 101)
4 Raw, Encap
5 Raw, Encap, QoS(Cr 0, Thrsh 2, Max 13)
6 Raw, Encap
7 Raw, Encap
8 Raw, Encap, QoS(Cr 0, Thrsh 2, Max 5)
9 Raw, Encap, QoS(Cr 0, Thrsh 2, Max 5)
10 Raw, Encap, QoS(Cr 0, Thrsh 2, Max 5)
11 Raw, Encap, QoS(Cr 0, Thrsh 2, Max 5)
12 Raw, Encap
13 Raw, Encap
14 Raw, Encap
PXF CEF info
PXF NAT info
Total Reserved In-use
16 Kb 10 Kb
32 Mb 26 Mb 16 Kb
16 Kb 512 bytes
32 Mb 669 Kb 2015 Kb
16 Kb 6656 bytes
32 Mb 441 Kb 800 Kb
16 Kb 15 Kb
32 Mb 2092 Kb 128 Kb
Appendix B PXF Information
Free
0 bytes 6144
5554 Kb
0 bytes 15 Kb
29 Mb
0 bytes 9728
30 Mb
0 bytes 512
29 Mb
OL-5419-01 B0