Installing The Compactflash Disk, Gbic, And Port Adapter; Installing And Removing The Compactflash Disk - Cisco 7401ASR Installation And Configuration Manual

Chapter 1 Overview and Parts Installation
Table 1-2 Cisco 7401ASR Router Installation Checklist
Task
I/O ports and port adapter are operational (see
Correct hardware configuration displayed after system banner appears

Installing the CompactFlash Disk, GBIC, and Port Adapter

You may have ordered a CompactFlash Disk, Gigabit Interface Converter (GBIC), and one of a variety
of port adapters or service adapter with your Cisco 7401ASR router. You must install the CompactFlash
Disk, GBIC, and port adapter service adapter. Use the installation instructions in the following sections
to install or remove one of these optional parts:
•
•
•

Installing and Removing the CompactFlash Disk

Figure 1-4
1
Insert the CompactFlash Disk in the CompactFlash Disk slot (1) with the label with the vendor name and
memory size facing up. It protrudes when completely seated. To remove the CompactFlash Disk, grasp
it and pull it from the slot (2).
The CompactFlash Disk is keyed to prevent it being inserted incorrectly.
Only the CompactFlash Disk is supported in a Cisco 7401ASR router.
Note
OL-5419-01 B0
Figure 1-2
Installing and Removing the CompactFlash Disk, page 1-7
Installing and Removing the Gigabit Interface Converter, page 1-8
Installing and Removing a Port Adapter or Service Adapter, page 1-10
Installing and Removing the CompactFlash Disk
1
CompactFlash Disk insertion
Installing the CompactFlash Disk, GBIC, and Port Adapter
on page 1-3 for specific LED information)
2
2 CompactFlash Disk removal
Cisco 7401ASR Installation and Configuration Guide
Verified
By Date
1-7