Cisco Nexus 7018 System - Cisco Nexus 7000 Series Hardware Installation And Reference Manual

Cisco Nexus 7000 Series
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
Figure 1-5

Cisco Nexus 7018 System

The Cisco Nexus 7018 chassis has 18 slots that allow for two supervisor modules and up to 16 I/O
modules. The chassis also holds up to five fabric modules, two fan trays, up to four power supply units,
and a cable management system. The chassis also has a mounting bracket and four positioning handles
(two on each side) that you use to install the chassis after you position it on a rack. Optionally, you can
include a front door to protect the I/O cable connections.
Figure 1-6
Figure 1-8
standard features on the rear of the chassis.
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
1-6
Two Cisco Nexus 7010 Chassis Installed in a Four-Post Rack
Install a second chassis
immediately above the
first installed chassis.
identifies the standard features on the front and sides of the Cisco Nexus 7018 chassis,
identifies the optional feature on the front side of the chassis, and
Chapter 1 Overview
Figure 1-9 identifies the
OL-18634-01