Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 73

Chapter 3 Installing a Cisco Nexus 7018 Chassis
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
Figure 3-16
1
1 Four M4x8 pan-head screws that fasten the
hood to the chassis.
Tighten the four M4x8 screws that fasten the hinge bracket to the chassis to 11 to 15 in. lbs.
Step 5
Tighten the four M4x8 screws that fasten the hinge bracket to the cable management assemblies to 11 to
Step 6
15 in.lbs.
Fasten the four ball-point studs (51-5008-01), each one with a washer (49-0430-01), to the bottom
Step 7
portion of the chassis, one stud by each corner of the air intake area as shown in
OL-18634-01
Attaching the Hinge Bracket to the Cable Management Assemblies and Chassis
2
1
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Installing the Front Door and Air Intake Frame
2
2 Four M4x8 pan-head screws that fasten the
hood to the left and right cable management
assemblies.
Figure 3-17.
3-23