Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 77

Chapter 3 Installing a Cisco Nexus 7018 Chassis
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
Figure 3-20
1 Press the locking button to lock the door onto
the hinge pins.
Note Be sure that the door is firmly latched to the two hinge pins. If both of the hinge pins are not secured
behind the door latch, hold the door securely with one hand while opening the door handle for the
unsecured side until the handle clicks, press that side of the door so that the pins are positioned all the
way inside the door slots, press the door latch button on the interior side of the door, and then make sure
that the door is firmly secured to both hinge pins.
Open the door handle on the open side of the door until it clicks. This action opens the latches on the
Step 13
open side of the door. See
OL-18634-01
Attaching the Left Side of the Door
1
Figure 3-21.
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
Installing the Front Door and Air Intake Frame
3-27