Cisco Nexus 7000 Series Hardware Installation And Reference Manual page 19

S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
Overview
This chapter provides an overview of the Cisco Nexus 7000 Series device and includes the following
sections:
•
•
•
•
•
Cisco Nexus 7000 Series
The Cisco Nexus 7000 Series systems are multiprotocol-capable, high-density, and high-performance
devices that incorporate Ethernet/IP, virtualization, Layer 4 to Layer 7 services, and low-latency
interconnect (LLI) technologies. The Cisco Nexus 7000 Series models are described in the following
subsections:
•
•
Cisco Nexus 7010 System
The Cisco Nexus 7010 chassis has 10 slots that allow for two supervisor modules and up to eight I/O
modules. The chassis also holds up to five fabric modules, two system fan trays, two fabric fan trays, up
to three power supply units, and a cable management system. The chassis also has a mounting bracket
and four positioning handles (two on each side) that you use to install the chassis after you position it
on a rack. Optionally, you can include an air filter and mid-frame doors.
Figure 1-1
Figure 1-2
standard features on the rear of the chassis.
OL-18634-01
Cisco Nexus 7000 Series, page 1-1
Preparing the Site, page 1-12
Safety Guidelines, page 1-13
Installation and Connection Guidelines, page 1-13
Replacing Components, page 1-14
Cisco Nexus 7010 System, page 1-1
Cisco Nexus 7018 System, page 1-6
identifies the standard features on the front and sides of the Cisco Nexus 7010 chassis,
identifies the optional features on the front side of the chassis, and
C H A P T E R
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
1
Figure 1-3 identifies the
1-1