Christie LX400 Manual page 40

SETUP Menu
SETUP Menu (continued)
Item
KEYSTONE
WHISPER
MIRROR
LX400 User Manual - Operating Guide
Using the ▲/▼ buttons corrects the horizontal keystone distortion.
Shrink the right of the image
• The adjustable range of this function will vary among inputs. For
some input, this function may not work well.
• When the zoom adjustment is set to the TELE (telephoto focus),
this function may be excessive. This function should be used when
the zoom adjustment is set to the full WIDE (wide-angle focus)
whenever possible.
• When the vertical lens shift is not set fully upward (not set fully
downward for the optional lens type FL-601 only (
function may not work well.
• This function will be unavailable when the Transition Detector is
51).
on (
Using the ▲/▼ buttons turns off/on the whisper mode.
NORMAL WHISPER
• When the WHISPER is selected, acoustic noise and screen
brightness are reduced.
Using the ▲/▼ buttons switches the mode for mirror status.
NORMAL H:INVERT
If the Transition Detector is TURN ON and MIRROR status is
changed, Transition Detector Alarm (
projector is restarted after the power switch is turned off.
Description
Shrink the left of the image
V:INVERT
51) will be displayed when
36
020-000169-03 Rev. 1 (11-2010)
45)), this
H&V:INVERT